To dismiss a battery warning notification displays permanently on your SmartBand Talk when the battery runs out of power, indicating that you need to charge it. The warning gets repeated when the battery reaches charge levels of 10 and 5 percent, respectively. When your SmartBand Talk is on and the battery level goes below 15 percent, it emits one short vibration and a warning notification appears on the screen to indicate that the battery is low. From the main application screen of your Android™ device, find and tap.To check the battery level of your SmartBand Talk If you are charging the device for the first time, make sure you charge it for at least 30 minutes. If your SmartBand Talk is not used during charging, it takes 45 to 70 minutes to fully charge it depending on the type of charger used.ġ Plug one end of the USB cable into the charger or into the USB port of aĢ Plug the other end of the cable into the Micro USB port of your SmartBand Talk. Charging your SmartBand Talkīefore using your SmartBand Talk for the first time, you need to charge it for approximately 30 minutes. After the application closes, the idle mode screen becomes active. You can use the function key to navigate between different screens and applications. Also note that the screen does not recognise swiping movements. Remember to firmly tap the SmartBand Talk in order for the device to register a command. The display of the SmartBand Talk is not touch sensitive. Handle installed applications, for example, add bookmarks.If the screen is idle for 30 seconds, the idle mode screen becomes active. You can control applications by firmly tapping the SmartBand Talk and you can navigate from screen to screen by pressing the function key. Also note that when the content displayed on the screen changes, there is a brief transition time. The image on your E Ink® screen is retained even when power to the screen is turned off. Instead, ambient light from the environment is reflected from the surface of the display, making it more comfortable to read. In an E Ink® display, no backlight is used. Your SmartBand Talk features an E Ink® display that uses electronic ink technology to reproduce the appearance of ordinary ink on paper. Also, remember that your Android™ device must run the Android™ software version 4.4 or higher and support the Bluetooth® version 3.0 profile. Refer to the relevant setup information for more details. And with dozens of applications available for your SmartBand Talk on Google Play™, you can add new features regularly.īefore you can get started using your SmartBand Talk, you must download the SmartBand Talk application and set up the accessory to work with your phone or tablet. For example, you can use it to handle alarms, phone calls and text messages, and to record voice notes. The accessory also helps you to stay organised and manage common day-to-day tasks. Together with the Lifelog application, you can set personal goals and then track your progress in a comprehensive and easily viewable format. For example, the SmartBand Talk counts your steps and records data about your physical state while you walk or run. Worn on your dominant wrist, it can monitor your body movements and interact with your Android™ device to generate data about your daily life and habits. The SmartBand Talk is both a standalone device as well as a companion product that connects wirelessly via Bluetooth® with Android™ smartphones and tablets. Using your SmartBand Talk in wet and dusty conditions. Synchronising data with the Lifelog application. Logging your activities using the Lifelog application. Locating your SmartBand Talk.Ĭontrolling applications with your SmartBand Talk. Interacting with the SmartBand Talk.Ĭharging your SmartBand Talk.Īssembly.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |